This automated optical Fiber tensile testing program is ideal for operator skill impartial use in creation and laboratory settings. Two basic model designs enable the consumer to choose from a set up for standard linear proof screening with extra mandrels for rotary high strength testing.

The linear version is ideal for production evidence screening with forces approximately 22 N. Motorized clamps with very carefully designed rubberized inserts be sure that the Fiber coating will not be damaged within the screening process while at the same time getting rid of the necessity for an outside air supply. Degrees of tugging force, tugging speed and hold time are programmable and conveniently available to the Secondary Coating Line with the built-in Liquid crystal display touchscreen display manage. Information from assessments can be saved and reached using the Universal serial bus port or Ethernet interface.

Mandrels of the same design like NYFORS’ visual Fiber recoaters can be easily mounted on the evidence tester within the rotary higher power settings. The Fiber is wrapped across the two mandrels which assistance it having a unique clamping system. In this way much higher lots can be employed onto the Fiber, allowing breaking power assessments under managed conditions.

Adjustable clamp positioning facilitates screening with all the greatest force amounts as well as testing of short Fiber measures. The lightweight and light bodyweight style helps make the instrument easy to maneuver in Tape Former and also to integrate within a creation work table where space is at reduced. The equipment is actually a lightweight and light-weight tool perfect for testing the strength of visual materials approximately 30 N. The equipment is designed to meet all sorts of applications when a power test needs to be performed.

The device was created with all the consumer in mind. The Fiber is easily put into the carefully guided linear clamps, as well as the screening starts instantly having a “One Touch” go switch. The built-in microprocessor controls all of the important parameters such as pulling force, pulling speed and hold time. This allows for any completely managed check each and every time.

The device can be linked to an external PC, which enables usage of all programmable parameters and settings. The device is tailored to face-on your own use or even to the integration into various subsystems. The device comes with an extensive capability of logging and conserving information like tugging force, pulling velocity and Fiber size and other guidelines.

Two recoat injector designs can be found. The PTR307 uses a computerized water pump to inject the recoat materials. The quantity of materials dispensed by the automated injector is managed by hand via the top-installed “Inject” button or programmed in to the machine using the tablet control. The PTR307B includes a manual recoat shot program that needs an individual to personally distribute the recoat material into the mold cavity; another one injector for that PTR307B recoater is accessible listed below. Please note the automatic injector is only compatible with high-index recoat material, whilst the manual injector works with both reduced- and high- directory recoat materials; they are both marketed separately listed below. Make sure you get in touch with Tech Support to learn more.

he handbook injector can be installed to suitable Fiber recoaters through the 4-40 screws on the recoater real estate (see picture for the right). Utilize a 3/32″ hex key to secure the injector prior to use. To connect the PTRRRM to the recoater mold, tighten the connector at the conclusion of the eco-friendly plastic tubing, then loosen by way of a 1/4 turn to allow for rotation.

The injector comes with a distribution device and 2-place selection handle for directing the stream of recoat materials. A knurled dispensing attach with an internal plunger behaves as a syringe for your recoat materials. To fill up the FTTH Cable Production Line, point the lever downwards (i.e., towards the recoat bottle), then spin the knurled dispensing attach counterclockwise until it spins easily to fill up the syringe (demonstrated inside the photo for the right). Then, to inject the recoat materials into the mold, point the lever horizontally (i.e., dealing with the knurled attach) and fdrofe the screw clockwise till nearby the finish from the travel range is reached. Steer clear of bottoming out the dispenser because this may harm the interior plunger; also be careful when re-interesting the threads in order to avoid go across threading the dispensing screw. A number of fill/inject actions may be needed till air is displaced inside the system. Use lens tissue and an acetone or alcohol cleansing solution to accumulate any excess recoat materials that runs from the mold.

Fiber Coloring Machine..

We are using cookies on our website

Please confirm, if you accept our tracking cookies. You can also decline the tracking, so you can continue to visit our website without any data sent to third party services.